 
|
| 起源の場所: | 中国 |
| ブランド名: | Longdai |
| モデル番号: | LW |
| ドキュメント: | Long Dai Water Treatment Eq...ue.pdf |
| 最小注文数量: | 1セット |
|---|---|
| 価格: | 15000USD-25000USD |
| パッケージの詳細: | 木またはカスタマイズされる |
| 受渡し時間: | 30営業日 |
| 支払条件: | L/C、D/A、D/P、T/T、ウェスタンユニオン、マネーグラム |
| 供給の能力: | 月額100セット |
| ボウルスペッド: | 4000R/min | 材料: | SS304 |
|---|---|---|---|
| 機械: | 分離遠心分離機 | メンテナンスが容易: | 迅速な分解と清掃 |
| コロケーション: | 二重変速装置の二重モーター | ドラムスピード: | 約3200r/分 |
| 重さ: | 1400 | 特徴: | 継続的な動作,高効率,低保守 |
| 放電式: | 螺線形ねじ排出 | 遠心分離機型: | デカンター遠心分離機 |
| ハイライト: | municipal wastewater decanter centrifuge,mining sludge decanter centrifuge,high-performance sludge reduction centrifuge |
||
In modern industrial and municipal wastewater treatment, sludge handling typically accounts for up to 60% of total operational costs. Conventional dewatering methods often suffer from either excessively high cake moisture content—driving up transportation expenses—or excessive polymer (flocculant) consumption.
Our heavy-duty horizontal screw decanter centrifuge is engineered specifically to address these challenges. Whether you’re processing municipal sludge, industrial effluent, or mineral tailings, our system delivers among the lowest achievable cake moisture levels and exceptionally clear centrate in the market.
Unlike standard centrifuges, our units feature critical components protected with duplex stainless steel or tungsten carbide wear-resistant alloys, ensuring durability in the harshest environments.
High Length-to-Diameter Ratio (L/D = 3.5–4.2)
Extends residence time inside the bowl, enabling effective dewatering even of difficult-to-process biological sludges—achieving cake dryness of ≤75–80% moisture (depending on feed characteristics).
High G-Force Separation (Up to 3,000–4,000 × g)
Captures fine particles down to the micron level, significantly outperforming belt filter presses in both clarity and solids recovery.
Optimized Differential Gearbox
Equipped with either hydraulic or planetary gear differential drives, offering high torque and excellent shock resistance—ideal for abrasive feeds like sand-laden slurries or mining tailings.
| Benefit | Impact |
|---|---|
| Lower Transportation Costs | Drier cakes = fewer truckloads and reduced disposal fees |
| Reduced Polymer Consumption | Advanced liquid pool depth control saves 10–15% in flocculant vs. competitors |
| Fully Automated & Continuous Operation | 24/7 unattended operation with PLC/HMI control; minimal manual intervention |
| Extended Service Life | Scroll flights hardfaced with tungsten carbide alloy, rated for >30,000 operating hours |
Choosing our decanter centrifuge means choosing lower lifecycle costs and higher environmental compliance. We offer end-to-end support—from engineering selection and installation to global after-sales service.
Note: The following data represent typical industry ranges for reference purposes and are not brand-specific. Suitable for inclusion in generic product specification sheets.
| Parameter Category | Item | Small Model | Medium Model | Large Model |
|---|---|---|---|---|
| Basic Dimensions | Bowl Diameter (mm) | 350 – 450 | 500 – 650 | 700 – 800+ |
| Length-to-Diameter Ratio (L/D) | 3.5 – 4.2 | 3.8 – 4.2 | 4.0 – 4.5 | |
| Effective Settling Area (m²) | 10 – 20 | 25 – 60 | 70 – 120 |
| Parameter Category | Item | Small Model | Medium Model | Large Model |
|---|---|---|---|---|
| Capacity & Speed | Throughput (m³/h) | 5 – 20 | 20 – 60 | 60 – 150+ |
| Max. Bowl Speed (rpm) | 4,500 | 3,500 | 2,800 | |
| Separation Factor (×g) | Up to 4,000 | Up to 3,200 | Up to 2,500 | |
| Differential Speed (rpm) | 0.5 – 20 (adjustable) | 0.5 – 20 (adjustable) | 0.5 – 20 (adjustable) |
| Parameter | Small Model | Medium Model | Large Model |
|---|---|---|---|
| Cake Moisture – Municipal Sludge | 75% – 80% | 75% – 80% | 75% – 80% |
| Cake Moisture – Industrial Sludge | 65% – 75% | 65% – 75% | 65% – 75% |
| Solid Recovery Rate | ≥ 95% | ≥ 95% | ≥ 95% |
| Component | Small Model | Medium Model | Large Model |
|---|---|---|---|
| Bowl Material | Duplex SS 2205 / 316L | Duplex SS 2205 | Super Duplex Stainless Steel |
| Scroll (Screw) Material | 316L + Tungsten Carbide-tipped flights | 316L + Tungsten Carbide-tipped flights | 316L + Tungsten Carbide wear tiles |
| Frame/Base Material | Painted carbon steel or stainless steel | Painted carbon steel | Heavy-duty carbon steel structure |
| Parameter | Small Model | Medium Model | Large Model |
|---|---|---|---|
| Main Motor Power (kW) | 15 – 30 | 37 – 75 | 90 – 160 |
| Backdrive (Scroll) Motor Power (kW) | 4 – 7.5 | 11 – 22 | 30 – 45 |
| Length (mm) | 2,500 – 3,500 | 3,500 – 4,500 | 4,500 – 6,000 |
| Width (mm) | 800 – 1,200 | 1,200 – 1,600 | 1,600 – 2,200 |
| Height (mm) | 1,000 – 1,400 | 1,400 – 1,800 | 1,800 – 2,300 |
| Weight (kg) | 2,000 – 3,500 | 4,000 – 8,000 | 9,000 – 15,000 |
コンタクトパーソン: Mr. Vance
電話番号: +8615301537517
ファックス: 86-0510-87837599
